Due to the current fluctuations in exchange rates and the
impact of the recession on manufacturers, please regard the
prices on this page as ‘guide’ only. If you are interested
in the equipment you must contact me for a current
price.
PRO 50 MkII active sub bass system
£399
MJ Acoustics Set the new standard for affordable
subwoofers. Redesigned from the ground up this subwoofer
has it all. Twin crossovers, 120watts of power, new
designed 10” driver and all packed into a diminutive
cabinet size of just 280mm cube. Designed to integrate with
any speaker from small satellites to high end floor
standers. With bass out put down to 13hz and a -3db rating
at 19hz in room it really is unbelievable value.
The PRO 50 MkII is an awesome adjunct to complement the
most discerning cinema and music system! The 120 watts
MOSFET amplifier feeds an ultra long-throw super-rigid 10”
sub-bass driver of rugged design and finish. Add to this a
beautiful non-reflective satin finish, and attention to the
finest and smallest detail. The PRO 50MkII delivers vast
punch and solid slam – without the dreaded overhang – down
to a gut-wrenching 13Hz.
Our unique combination of state-of-the-art electronics and
tuned hand-built sealed cabinet, affords the user the
ultimate in sub-bass control. Deep and powerful enough for
the most demanding movie sound-track, yet subtle, agile,
fast, and accurate for the highest fidelity in music
listening. It’s just like being there!
- 120watt MOSFET Amplifier
- Speaker and Line Level inputs with Gain Control Range 80 and 60dB
- Neutrik Speakon connector (High level 100k ohm)
- Unbalanced RCA (phono) connector (Gold Plated) (Low level 10k ohm)
- Twin Sophisticated Crossover Circuits - variable increments between 20Hz and 120Hz
- LFE Bypass setting which opens crossover to 200hz on line level input
- Phase Control infinitely adjustable between 0º and 180º
- Frequency response 13hz to 200hz * I.S.P. ( Intelligent Speaker Protection)
- Specially designed cabinet structure, volume, and configuration made from inert 18 MDF
- Switched fused IEC mains input socket
- 250mm (10”) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets
- UK 2 year manufacturers return to base warranty
- Dimensions (WxHxD ) 280mm X 320mm X 280mm * Weight 11.55kg (25.46 lbs)
- Black Satin Paint finish as standard
PRO 55 MkI active sub bass system
£650
MJ Acoustics Set a new standard for affordable subwoofers.
designed from the ground up this subwoofer has it all. Twin
crossovers, 150watts of power, new designed 12” driver and
all packed into a diminutive cabinet size of just 345mm
cube. Designed to integrate with any speaker from small
satellites to high end floor standers. With bass out put
down to 10hz and a -3db rating at 19hz in room it really is
unbelievable value.
The PRO 55 MkI is an awesome adjunct to complement the most
discerning cinema and music system! The 150 watts MOSFET
amplifier feeds an ultra long-throw super-rigid 12”
sub-bass driver of rugged design and finish. Add to this a
beautiful non-reflective satin finish, and attention to the
finest and smallest detail. The PRO 55MkI delivers vast
punch and solid slam – without the dreaded overhang – down
to a gut-wrenching 10Hz.
Our unique combination of state-of-the-art electronics and
tuned hand-built sealed cabinet, affords the user the
ultimate in sub-bass control. Deep and powerful enough for
the most demanding movie sound-track, yet subtle, agile,
fast, and accurate for the highest fidelity in music
listening. It’s just like being there!
- 150watt MOSFET Amplifier
- Speaker and Line Level inputs with Gain Control Range 80 and 60dB
- Neutrik Speakon connector (High level 100k ohm)
- Unbalanced RCA (phono) connector (Gold Plated) (Low level 10k ohm)
- Twin Sophisticated Crossover Circuits - variable increments between 20Hz and 120Hz
- LFE Bypass setting which opens crossover to 200hz on line level input
- Phase Control infinitely adjustable between 0º and 180º
- Frequency response 10hz to 200hz * I.S.P. ( Intelligent Speaker Protection)
- Specially designed cabinet structure, volume, and configuration made from inert 18 MDF
- Switched fused IEC mains input socket
- 300mm (12”) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets
- UK 2 year manufacturers return to base warranty
- Dimensions (WxHxD ) 280mm X 383mm X 345mm * Weight 15.1kg (33.4 lbs)
- Black Ash real wood veneer Painted finish as standard
Reference 200 active sub bass system £850
The Reference 200 has a feature list as long as two arms. Maximum controllability is available on the Reference 200 and is simple to use via its digital display confirming all your settings. Due to its small 300mm square cabinet size, the Reference 200 can be tucked away into the smallest of areas. With its 250mm Ultra Long-Throw sub bass driver, a high level cable, and M8 spikes, the Reference 200 is amazingly well equipped and ready for the most demanding movies and the most detailed bass lines. If that’s not enough, it even comes with a totally out-of-sight remote control and a remote eye receiver to make recalling one of the 4 user-presets an absolute breeze. Ask your local dealer for a demonstration today and experience the missing link to your system!
- 200watt MOSFET Amplifier
- Speaker and Line Level inputs with Gain Control Range 99dB
- Neutrik Speakon connector (High level 100k ohm)
- Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm)
- Twin Sophisticated crossover circuits - variable increments between 20Hz and 120Hz
- LFE Bypass setting
- 12 volt trigger
- Remote Control with ‘out-of-sight’ RM Eye and 4 user-presets
- Phase Control infinitely adjustable between 0º and 180º * Frequency response 13hz to 200hz
- D.I.P. (Dynamic Intelligent Protection)
- D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation)
- MIDI Interface
- Specially designed cabinet structure, volume, and configuration made from inert 18 & 25mm MDF
- Digital Display with power output meter and frequency setting
- Switched fused IEC mains input socket
- 250mm (10”) Ultra Long-throw Driver with Heavy Duty chassis & Double Magnets
- UK 3 year manufacturers return to base warranty
- Dimensions (WxHxD ) 300mm X 355mm X 300mm * Weight 18.85kg (43.3 lbs)
- Black Ash finish as standard with other Real Wood Veneer finishes available.
Reference I MkIII active sub bass system £1150
The Reference I MkIII has the muscle and flexibility to suit the largest of AV systems. Maximum controllability is available on the Reference I MkIII and is simple to use via its digital displays confirming all your settings. With a 250mm Ultra Long-Throw sub bass driver inside the large ported cabinet, the Reference I MkIII outputs serious SPL and it belies its short stature. The Reference I MkIII is amazingly well equipped and ready for the most demanding movies and the most detailed bass lines. It even comes with a totally out-of-sight remote control and a remote eye receiver to make recalling one of the 4 user-presets an absolute breeze. Ask your local dealer for a demonstration today and experience the missing link to your system!
- 250watt MOSFET Amplifier
- Speaker and Line Level inputs with Gain Control Range 99dB
- Neutrik Speakon connector (High level 100k ohm)
- Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm)
- Twin Sophisticated crossover circuits - variable increments between 20Hz and 120Hz
- LFE Bypass setting
- 12 volt trigger
- Remote Control with ‘out-of-sight’ RM Eye and 4 user-presets
- Phase Control infinitely adjustable between 0º and 180º * Frequency response 10hz to 200hz
- D.I.P. (Dynamic Intelligent Protection)
- D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation)
- Ported design cabinet with 100mm internal fluted port.
- Specially designed cabinet structure, volume, and configuration made from inert 25mm MDF
- Digital Display with power output meter and frequency setting
- Switched fused IEC mains input socket
- 250mm (10”) Ultra Long-Throw Driver with Heavy Duty chassis & Double Magnets
- UK 3 year manufacturers return to base warranty
- Dimensions (WxHxD ) 500mm X 458mm X 320mm * Weight 20kg (46.12 lbs)
- Black Ash finish as standard with other Real Wood Veneer finishes available.
Subliminal S1R Audiophile stereo speaker
The beautiful Subliminal S1R floorstanding audiophile stereo speakers.
Rarely is a speaker finished to such a high standard as the S1R's. Capped in solid wood, the rigidity and sonic solidity of the S1R's are phenominal. Standing less than a metre tall and only 100mm deep, the S1R's are simple to place in any room in almost any position, as they can pivot on their single foot, allowing the solid plinth to secure the speaker and the driver to face the all important listening spot.
The S1R's adopt a transmissionline cabinet design and they have no electronic crossover. A single 4" full-range driver with molecular vibration technology is used to provide fequencies between 40Hz - 22KHz. The driver flexes thoughout the frequency range to produce crisp, clean treble frequencies without being sharp or cheeky and tight rigid bass register frequencies.
Reproduction of female vocals are detailed and enjoyable to the ears, unlike many two-way speakers where the tweeter can make a feminine vocal sound harsh and too bright. Mid range frequencies have excellent definition and provide a wide sense of depth and display superb stereo imaging.
- Output: 100 watts handling power.
- Impedance: 6 Ohm.
- Cone: Single 4” full-range driver with molecular vibration technology
- Sensitivity: 88dB @ 1w/1mtr
- Freq Range: 40Hz – 22Khz
- Freq Crossover: No electronic crossover
- Cabinet Architecture: Transmission line
- Dimensions: H980mm x W356mm x D104mm
- Base: Swivel action with M8 spike receptacles
- Finishes: Maple, Cherry, Light Oak.
Subliminal S1RM Audiophile stereo speakers
The beautiful Subliminal S1RM standmount audiophile stereo speakers.
Rarely is a speaker finished to such a high standard as the S1RM. Capped in solid wood, the rigidity and sonic solidity of the S1RM's are phenominal. Standing less than half a metre tall, the S1RM's are designed for stand mounting or bookshelf placement
.
The
S1RM's adopt a transmissionline cabinet design and they
have no electronic crossover. A single 4" full-range driver
with molecular vibration technology is used to provide
fequencies between 40Hz - 22KHz. The driver flexes
thoughout the frequency range to produce crisp, clean
treble frequencies without being sharp or cheeky and tight
rigid bass register frequencies.
Reproduction
of female vocals are detailed and enjoyable to the ears,
unlike many two-way speakers where the tweeter can make a
feminine vocal sound harsh and too bright. Mid range
frequencies have excellent definition and provide a wide
sense of depth and display superb stereo imaging.
- Type: Audiophile - Reference standmount stereo speakers
- Output: 100 watts handling power.
- Impedance: 6 Ohm.
- Cone: Single 4” full-range driver with molecular vibration technology
- Sensitivity: 88dB @ 1w/1mtr
- Freq Range: 40Hz – 22Khz
- Freq Crossover: No electronic crossover
- Cabinet Architecture: Transmission line
- Dimensions - Mains: H430mm x W204mm x D290mm
- Dimensions - Centre: H204mm x W430mm x D290mm
- Weight: 10kg (22.05lbs) each
- Finishes: Maple, Cherry, Light Oak.
The XENO System
5.1 system £795
5.0 speaker pack £550
Sats XM1 £230
center XC1 £160
stands £99
Having spent many years perfecting the bass frequency range, the MJ design team were given the task of developing a matched affordable speaker system that can reproduce true audiophile registers accurately, whilst providing an open sound stage and fast transient dynamics throughout the full frequency range. The lower registers reaching down below 45Hz can be taken care of by MJ’s highly developed current generation of Subwoofers and the Pro 50Mk2 will be avialable as part of the system, thus forming a perfect match developed by a subwoofer specialist manufacturer. An interesting twist on the normal approach by our competitors. We developed the XENO speaker system to match our subwoofers whilst others develop subwoofers to match their speakers.
Apart from the obvious requirement for outstanding audio quality there are some unique touches provided within the XENO design.
- 1.High Grade crossover using the very best tightly wound coils and superior crossover passive components.
- 2.Ability to be fed with a full range signal, removing the need to use bass management.
- 3.Bass driver technology derived from our extensive experience of subwoofer transducer design.
- 4.Tweeter employing soft dome technology and higher strength magnets, for sweeter higher frequencies.
- 5.Cabinet finish to match the finest quality of paint finish with super gloss shine and consistent colour depth.
- 6.Heavy weight dedicated stands designed to offer maximum stability and ease of room positioning.
- 7.Boundary effect rear ports to enhance the refraction effects from the lower frequencies.
- 8.Dedicated and vocally accurate centre speaker with twin bass drivers, additional power handling and extended band width.
What
do you get in the complete system?
- Two pairs of XM1 speakers which are individually full range with a frequency response of 48Hz — 23kHz (-3db in room).
- One XC1 triple driver centre speaker.
- Pro 50Mk2 finished in matching high gloss paint finish.
- XM1 available as stereo pairs or an additional pair to make up a 7.1 system.
- XC1 additional centre speaker to make up a 6.1 system.
- XM1 Stands with cast iron base and highly polished chrome pole and descrete top plate.
- XM1 wall brackets which are adjustable for tilt and turn.
- XC1 wall bracket adjustable for turn.
Each XENO loudspeaker features a critically shaped paper pulp cone mid/bass driver providing transparent and dynamic mid/bass registers. Utilizing technology from our subwoofer drivers we have built into the design an extended cone travel and ultra linear motor assembly to control the bass accurately down to the rated frequency. The tweeter (treble driver) is a soft textile dome unit with Neodymium magnet, providing complimentary transparent and crisp higher octaves. These drivers are specifically matched to compliment each other and come fully shielded for Audio Visual use. The system is audibly bound together with the inclusion of a high quality crossover using audiophile matched capacitors and specially wound induction coils to precise specifications. Additionally each cabinet is hand crafted from high grade MDF which is finished in a luxury high Gloss quality two part paint coating.
Each cabinet is meticulously crafted using a combination of precision CNC machinery and skilled carpenters providing the finishing touches. Constructed from high quality MDF panels which are sprayed with no less than 5 coats of paint and completed to the finest furniture finish. The result is a stunning piece of architecture that finds itself able to blend in with all living environments
Each cabinet has been placed in an unwoven soft cloth bag to protect the high gloss finish. In each carton there are vinyl stickers to place over the threaded holes in the base should you wish to cover these holes and also 4 sticky rubber feet for each cabinet for shelf mounting. The stickers can be used to cover up the holes that are visible after the wall bracket has been attached. Not all stickers will be required and they are provided as a means of aesthetic improvement only as the threaded holes are sealed from inside the cabinet already.
- HF (high frequency) Unit: 25mm Textile soft dome, Neodymium Magnet damped (magnetically shielded).
- MF/LF (mid/low frequency) Unit: 150mm paper – pulp diaphragm cone with a 30mm high power magnetic voice coil and rubber surround. (magnetically shielded)
- Crossover: 5 element high power handling filter circuit. 12dB per octave slope at 2kHz high grade chokes and class A capacitors.
- Power handling: Amplifiers up to 100 watts for XM1, 120 watts for XC1 maximum.
- Overall frequency response: 48Hz — 23kHz (with Pro 50Mk2 13Hz—23khz).
- Sensitivity: 91dB 1W/1m @ 1kHz
- Impedance: Typically 4 ohms @ 1kHz
- Cabinet: Precision engineered low resonance reflex enclosure. 15mm high density MDF. Luxury two pack multi coated Gloss paint.
- Terminals: Gold plated 4mm coded binding posts.
- Weight: XC1 6.1Kg & XM1 3.4Kg each.
-
Dimensions (WxHxD): XC1 430 x 180 x 210 mm / XM1 180 x
260 x 210mm