logo


TecnoDec £592 [with RB250 arm £716]

The new entry-level turntable, taking the low-noise DC motor and the impedance-matched platter of the GyroDec, along with an advanced bearing on a simple solid-plinth design. The Michell TecnoDec requires no user-setup or maintenance.

michell_tecnodec


  • Solid-plinth turntable with standalone motor
  • Acrylic/vinyl platter, impedance-matched to the record
  • Oil-pumping inverted bearing
  • High-quality standalone DC motor
  • Arm board for Rega-compatible arms
  • Optional record clamp
  • Optional HR power supply
  • Optional dust cover
  • Finished in black acrylic with aluminium metal parts

GyroDec £1300 [with RB300 arm £1489]

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence. Earlier GyroDecs can always be brought up to present spec, and every modern GyroDec can be upgraded to almost the status of the mighty Orbe.

  • Single acrylic chassis, aluminium suspended subchassis with stabilized operation and internally isolated suspension turrets
  • Impedance-matched acrylic/vinyl platter, with brass weights for high inertia
  • Record clamp
  • Oil-pumping inverted bearing
  • Custom arm boards available for most tonearms
  • High-quality standalone DC motor
  • Optional HR power supply
  • Optional upgrade to Orbe-style platter and clamp
  • Finished in clear or tinted acrylic with aluminium metal parts, or in black acrylic with black and bronze metal parts

michell_gyrodec






Gyro SE - Spider Edition £1036 (with RB300 arm £1224)

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover.

  • Spider chassis, suspended stable subchassis
  • Massive acrylic/vinyl platter of high inertia, with gold-plated brass weights
  • Inverted oil-pumping bearing
  • Custom arm boards available for most tonearms
  • High-quality standalone DC motor
  • Optional clamp
  • Optional HR supply
  • Optional Orbe-style platter and clamp
  • Optional dust cover
  • Finished in silver

michell

The Michell SE (Spider Edition) is suspended at three points on a cast subchassis. It employs an inverted bearing design and pumps oil up to the thrust ball through a path inside the bronze bearing housing. The quiet motor has an on/off switch and a pulley about a quarter of an inch wide, which drives a rather thin belt. Records should be clamped to the platter, using the supplied reflex clamp.

Elegant in appearance, both at play and at rest, this is a high-tech piece of modern, functional art.




Orbe £2533

The Michell Orbe turntable takes the established concept of the GyroDec and adds to it an extra level of isolation, better structural damping, and an improved motor drive system. As of January 2004 the motor controller employs the revolutionary Never-Connected mains isolation circuit.

  • Double chassis, suspended pendulum subchassis
  • Damped subchassis
  • 60 mm thick massive acrylic/vinyl platter of high inertia
  • Screw-down record clamp, compatible with standard and 180g audiophile pressings
  • Inverted oil-pumping bearing
  • Custom arm boards available for most tonearms
  • High-quality standalone DC motor with tacho feedback speed control
  • Orbe Controller NC motor power supply with Never-Connected circuit
  • Finished in clear or black acrylic with black or aluminium metal parts

orbe_millennium




Orbe SE - Spider Edition £2223

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe's qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and dustcover. When teamed with an RB250 or RB300 tonearm, the Orbe SE is a surprisingly affordable entry to the Orbe-class of performance.

  • Spider double chassis, suspended pendulum subchassis
  • Damped subchassis
  • 60 mm thick massive acrylic/vinyl platter of high inertia
  • Screw-down record clamp
  • Inverted bearing
  • Custom arm boards available for most tonearms
  • High-quality standalone DC motor with tacho feedback speed control
  • Orbe Controller NC supply with Never-Connected circuit
  • Optional dust cover
  • Finished in black or clear acrylic with black metal parts

michell_orbese




HR precision motor power supply £335

The HR is a low-noise electronic power source for the DC motors as found on the TecnoDec, GyroDec and Gyro SE turntables. The HR features the novel Never-Connected circuit, and has a user-adjustable speed control on its back plate.


HRpsu





TECHNO ARM 'A' £442

The TecnoArm (A) is a fundamental mechanical rebuild of the well-known RB250 tonearm, to which is added monolithic wiring of the highest quality. The arm tube is bead-blasted and perforated, which disperses structural resonances and yields a lower effective mass. The arm wand is internally damped to reduce resonance further, and the headshell is machined flat, to allow true azimuth relative to the bearing craddle. After modification the bearings are re-adjusted for highest possible performance, according to original Rega procedures.

michell_tecnoarm




RB300 arm £188

RB250 arm £124




ACCESSORIES

Technoweight Rega arm upgrade £71.95

Set of two counterweights, metal endstub, and precise 0.1g Vertical Tracking Force adjuster for Rega RB-250 and RB-300 tonearms and their derivatives. One counterweight matches cartridges of 3 to 6g mass, the other is for cartridges of 7 to 13g. The center of mass is at the stylus level, thereby increasing tracking and reducing record wear.



Uni Cover £47.99

Covers platter and tonearm. Designed for the TecnoDec, Gyro SE and Orbe SE models, but fits most other coverless decks as well.

michell_unicover


SEcure Cover £195


Banana Plugs £15.75
Gold-plated banana plugs

banana



Speakers Plugs £15.75

bigmother


Amplifier Terminals - £15.75



Record Clamp £26.99

Black Delrin record clamp with anodised aluminium knob for use on GyroDec, TecnoDec, or third-party turntables.

michell_record_clamp



Tenderfeet - small [each] £4.75

Silver-coloured metal cones for speaker and equipment isolation. Note: black cones have been discontinued.

tenderfeet




Tenderfeet - large [each] £6.00

VTA Arm Adjuster [complete with 3 10mmshort standfolds] £19.99

Cartridge Mounting Kit -£5.50

Finger Locking Nut [to suit rega arms] -£7.99

Drive Belts £15.99

Gyro Bearing £82.99

Orbe Platter Kit £366

Suspension Adjusters & Springs £53.00


Standard Gyro Arm Plates - silver £38.00

Standard Gyro Arm Plates - bronze £41.00

Standard Gyro Arm Plates - black £41.00


Special Gyro Arm Plates - silver £50.00

Special Gyro Arm Plates - bronze £60.00

Special Gyro Arm Plates - black £60.00


Arm Plate De-coupling Kit £19.50